Water Leak & Flood Alarm (White)

(A)
Battery Operated with Remote Sensor (6-ft cord & suction cup)

The Water Leak Alarm with Remote Sensor is a self-contained electronic device to sound an alarm when the sensor is in contact with water. The electronic horn alarm is set off immediately when the sensor (on a 6' wire) comes in contact the water or moisture. The sensor can be used in a variety of methods depending on your application. It has an endless number of uses and can save customers thousands of dollars in water damage.

For unattended filling of bathtubs, pools, spas etc. at the point where you want to be alerted.

Evaporator pans under refrigerator, freezer, air handler etc.

Ideal under hot water heater, washing machine, dishwasher, or as a sump pump back up.

Storm sewer backup and basement leaks

Accumulation of water in bilges or condensation

Features:

- High impact plastic case
- Can be used portable or mounted in a fixed position
- Designed to alert you of overflows, leaks or water trouble
- Heavy duty sensor with a 6' sensor wire and suction cup
- Electronic circuit board
- Loud (approximately 75 to 85 dB) alarm (sounds for approximately 36 to 60 hours)
- The connector has screw on wires so you can route the wires through small areas first, then connect it to the alarm. If it is soldered direct to the unit it would limit some of the applications because of the size of the sensor
- Low battery warning
- Self-test button
- Visual (LED) and loud audible alarms
- Power: 9 volt alkaline battery
- Jack for conventional 9 volt adapter

Includes:
- Instructions
- 1 year manufacturer's warranty
- Remote sensor with 6' cord
- Mounting hardware included

******

(B)
Wireless Household Alert® Water Alarm Kit
(300' Range with 24" Remote Sensor & AC Adapter for Base Unit)

- Wireless water sensor transmitter & receiver detects water overflow, water leakage, rising water etc
- Alerts you when there is water present and potential flooding
- Suitable for your sump, washing-machine, hot water heater, bathtub, etc
- Supervised Sensor: monitors the sensors and their battery condition automatically
- Can work with up to 4 sensors (one sensor included; additional sensors sold separately)
- Easy to set up
- Audio indicator with volume control & ability to mute
- Visual indication with 1 green LED & 4 red LED's (1 per channel)
- FCC/IC approved

Specifications
- Operating range: approximately 300'
- Operating frequency: 318 MHz
- Sensor dimensions (submersible portion): 2⅛" x ⅝" x 1"
- Sensor dimensions (transmitter portion): 1⅛" x 1⅝" x 3"
- Sensor wire length (between submersible & transmitter): 24"
- Sensor power: 3v Lithium battery
- Sensor battery life: approximately 2 years (depends on how frequent it was triggered. The more it triggered, the battery life will be shorter). It is recommended to test it after a year, then every 3 months afterwards
- Receiver dimensions: 1⅜" x 2⅝" x 3¾"
- Receiver power: 12vDC, 100mA

Supplied with:
- 3v Lithium battery for transmitter
- AC to DC power adapter for receiver with 6' lead
- 1 Household Alert® Receiver
- 1 Water Sensor with 24" sensor lead & suction cups
- Clip tool (used to change channels)













The wireless water alarm is perfect for keeping track of moisture problems in areas that you may not be able to hear throughout the building. The signal can pass through walls and has an approximate range of 50'. It has an endless number of uses and can save customers thousands of dollars in water damage.

For unattended filling of bathtubs, pools, spas etc. at the point where you want to be alerted.

Evaporator pans under refrigerator, freezer, air handler etc.

Ideal under hot water heater, washing machine, dishwasher, or as a sump pump back up.

Storm sewer backup and basement leaks

Accumulation of water in bilges or condensation

Features:

- High impact plastic case
- Both Receiver and Transmitter are shelf or wall mountable
- Designed to alert you of overflows, leaks or water trouble
- Heavy duty sensor with a 6' sensor wire and suction cup
- Electronic circuit boards
- Low Battery Signal on Transmitter alerts you when battery needs replacing
- AC adaptable and / or Battery Powered (requires one 9V battery when using AC adapter or two 9 Volt batteries when not using AC adapter or as a battery back up (batteries not included)
- Typical Transmitter range is approximately 50 feet - You place Receiver where you know you will hear it!
- Test button allows you to periodically activate to ensure unit is working
- 8 channel security code setting to avoid false triggering

Transmitter specifications:
- Transmitter range: Up to ~50'
- 6' sensor wire with suction cup
- Power: 9 volt alkaline battery
- Operating frequency: 312MHz
- Code setting: 3 position slide switch for 8 different combinations
- Sound level: Over 80 dB
- Battery low: When battery is low the unit will beep intermittently
- Operating temperature: 32 to 122° F (0 to 50° C)

Receiver specifications:
- Receiver range: Up to ~50'
- Power: 9 volt alkaline battery and/or AC adapter (input 120VAC - output 9VDC 300mA {center +})
- Operating frequency: 312MHz
- Code setting: 3 position slide switch for 8 different combinations
- Sound level: Over 80 dB
- Battery low: When battery is low the unit will beep intermittently
- Operating temperature: 32 to 122° F (0 to 50° C)

Includes:
- Water alarm receiver with holder
- Water alarm transmitter with holder, remote sensor with suction cup
- Wall mounting brackets, screws and anchors
- 1 year manufacturer's warranty
- UL approved AC adapter for the receiver part
- Instruction manual


Note:
The above two models do not have automatic water supply shutoff feature. Click Here for models with automatic water shutoff feature (suitable for 1/4" and 3/8" O.D.(outer diamter) LLDPE (semi-flexible plastic) water supply tubing only.